Hysteresis Error
Up/down stroke return error.
Result
Hysteresis (%FS)
0.300
PASS (1=yes)
0
Calculation details
Return gap
0.300
Formula
Calculation logicVerify
Check before relying.
Up and down must agree.
- Same point approached both ways
- Friction and stiction noted
- Repeat after tapping the case
Related calculators
Calibration
ADC Resolution (LSB)
LSB from range and bit count.
- LSB (engineering)
- Resolves tolerance (1=yes)
Calibration
Calibration Tolerance Check
Allowed deviation vs class.
- Allowed deviation
- PASS (1=yes)
Calibration
Clamp vs Series mA Check
Difference in mA and %FS with PASS verdict.
- Absolute difference (mA)
- Difference (%FS)
Calibration
Percent Full-Scale Error
Error as percent of span.
- Error (%FS)
- PASS (1=yes)
Workspace
Keep the assumptions with the result.
Save this calculation to return to the inputs, result, and report from your private workspace.
Sign in or create an account to save this calculation.