0-10V to Engineering Units
Scale voltage signals to engineering units.
Result
Engineering value
50.000
Voltage reverse (V)
5.000
Calculation details
Percent of span (%)
50.00
Formula
Calculation logicVerify
Check before relying.
Volts need a stated full scale.
- Full scale is 10 V, or 2-10 V live-zero
- Input impedance loads dividers above 10 k
- Shield drain lands at one end only
Related calculators
Signal scaling
4-20 mA to Engineering Units
Convert loop current to process value and back.
- Engineering value
- Loop current reverse (mA)
Signal scaling
Loop Calibrator Setpoints
Drive current plus 0/25/50/75/100% table.
- Drive current (mA)
- Expected EU
Signal scaling
mA to Percent of Range
Live-zero percent of 4-20 mA span.
- Percent of span (%)
- Engineering value
Signal scaling
PLC Raw Counts to Engineering Value
S7/AB/12/16-bit profiles with custom range.
- Loop signal (mA)
- Engineering value
Workspace
Keep the assumptions with the result.
Save this calculation to return to the inputs, result, and report from your private workspace.
Sign in or create an account to save this calculation.